-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
Contact Columnist Form
Trouble in Your Tank: Moving Into Microvias, Part 3
If we have learned anything about moving into HDI manufacturing, it is that it takes a great deal of thought and discipline to be successful. Unfortunately, as the following bullet points delineate, all too often, the fabricator underestimates the scope of HDI and what this manufacturing strategy truly entails.
Here are a few common mistakes to avoid:
- Bootstrapping it
- Designers treating microvia technology like small through-holes
- Being afraid to invest in process improvements
- Failing to bring the “total package” to the end user
- Continuing to do the same things for the last 30+ years
- Thinking HDI is only for smartphones
These are common mistakes that companies, engineers, and managers make, and are left wondering why they are not participating in the HDI market successfully. These misconceptions lead many firms to miss the HDI opportunity.
So, let’s frame up the strategic choices, and begin by discussing desmear and metallization. Desmear and Metalization Not a whole lot is different here. It is all about removing drill smear and any laser drill debris from the capture pad, and ensuring that subsequent plating adheres to the resin and copper surfaces. Essentially, you should strive for the quality of the plating. There is no evidence of plating adhesion issues or defects or debris at the capture pad.
However, notice the lateral resin removal where the capture pad meets the side wall of the vias. This can be controlled by adjusting the via formation parameters, desmear chemistry concentrations, and operating temperatures. Note the shape of the via. Yes, it is preferred for quality plating purposes to ensure a “V” shape to the blind via. If the via is more or less shaped like a coffee cup, plating is challenged.
If the via has a smaller diameter at the top, then widens as the opening leads down to the capture pad, uniform plating will be difficult if not impossible to achieve.
To read the full version of this article which originally appeared in the January issue of PCB007 Magazine, click here.
More Columns from Trouble in Your Tank
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5Trouble in Your Tank: Electrodeposition of Copper, Part 6
Trouble in Your Tank: Electrolytic Copper Plating, Part 5
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 4
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 3
Trouble in Your Tank: Electrodeposition of Copper, Part 4—Addition Agents
Trouble in Your Tank: Lead-free and the Fabrication Challenge, Part 1
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 2