Flexible Printed Circuits: A Design Primer
December 19, 2023 | Chris Keirstead, PFC Flexible CircuitsEstimated reading time: 1 minute
Flexible circuits consist of conductive strips in a sandwich of insulating or dielectric material. They resist moisture and contamination and are insulated from external shorts, with holes or contact surfaces for interconnection.
Understanding a package’s electrical requirements and not over-designing permits means taking full advantage of a flexible circuit’s potential compared to conventional wiring. Among the benefits are weight and bulk reduction, shorter assembly time and fewer errors, reproducible electrical characteristics, custom shielding, improved reliability, ability to interconnect moving parts, and an engineered appearance.
The mechanical and electrical characteristics of flexible circuits determine what type should be used. Total installed cost, including inspection, interconnection, fixturing and testing, must be weighed against the advantages of each:
- Single-sided flexible circuits have one layer of copper on dielectric.
- Double-sided flexible circuits have copper on both sides.
- Sculptured circuits are single- or double-sided circuits created from thick copper that allows connections such as fingers and pads to be relatively thick and very rigid extensions of the flexible conductors.
- Multilayer flexible circuits have several layers that are registered to each other and are separated by a cured layer of adhesive during lamination, with interlayer connections via plated through-holes.
- Multilayer rigid-flex is the combination of flex within and extending from rigid sections of the PCB.
There are two general areas of application that may take the designer down different paths. The first is a circuit that will be bent or formed into a rigid package during assembly. The second is where the circuit will be flexed continuously or intermittently during operation.
To read the rest of this article, which appeared in the December 2023 issue of Design007 Magazine, click here.
Suggested Items
American Standard Circuits to Exhibit at Focus on PCB 2024 Italy
05/09/2024 | American Standard CircuitsAmerican Standard Circuits will be exhibiting at this year’s Focus on PCB Italy 2024 to be held on May 15 and 16 at the Vicenza Expo Centre, Vicenza, Italy.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.
FTG Announces Q1 2024 Financial Results
04/12/2024 | Firan Technology Group CorporationDuring Q1 2024, the Corporation has continued to invest in technology in existing sites, grow the business organically, and integrate the two acquisitions completed last year. FTG is strategically deploying its capital in ways that will drive increased shareholder returns for the future in both the near term and long term. Specifically, FTG accomplished the following in Q1 2024, which continues to improve the Corporation and position it for the future:
DuPont Unveils Pyralux ML Laminate Series, Offering High Thermal Management for Extreme Environments
04/09/2024 | DuPontDuPont introduced the DuPont™ Pyralux® ML Series of double-sided metal-clad laminates, a unique addition to its extensive family of Pyralux® laminates for flexible and rigid-flex printed circuit boards (PCBs).