DOCOMO, NTT, NEC and Fujitsu Develop Top-level Sub-terahertz 6G Device
April 12, 2024 | JCN NewswireEstimated reading time: 2 minutes
NTT DOCOMO, INC., NTT Corporation, NEC Corporation and Fujitsu Limited jointly announced today the development of a top-level (1) wireless device capable of ultra-high-speed 100 Gbps transmissions in the 100 GHz and 300 GHz sub-terahertz bands.
The four companies have been jointly conducting R&D on sub-terahertz devices since 2021 in anticipation of the coming 6G era. To date, tests of a jointly developed wireless device have achieved ultra-high-speed 100 Gbps transmissions in the 100 GHz and 300 GHz bands at distances of up to 100 meters.(2) By comparison, 100 Gbps is approximately 20 times faster than the maximum 4.9 Gbps (3) data rate of current 5G networks.
The roles and achievements of the four participating companies are described below.
DOCOMO
After analyzing the wireless system configuration and performance required for 100 GHz telecommunications applications, DOCOMO developed wireless transmission equipment capable of transmitting data rates equivalent to 100 Gbps at a distance of 100 meters.
NTT
Based on research into 300 GHz wireless devices and related equipment such as wideband mixers, NTT developed a top-level wireless device capable of transmitting 100 Gbps per channel at a distance of 100 meters in the 300 GHz band.(1)
NEC
After analyzing a wireless system configuration for telecommunications in the 100 GHz band, NEC developed a multi-element active phased array antenna (APAA) (1) consisting of more than 100 antenna elements.
Fujitsu
After researching compound semiconductor technologies that enable high-output, high-efficiency signal amplification to extend communication range and reduce power consumption in the 100 GHz and 300 GHz bands, Fujitsu achieved the world's highest power efficiency (4) in a high-output amplifier.
In the 6G era, when wireless networks are envisioned supporting diverse applications ranging from ultra-HD video streaming to real-time control in autonomous vehicles, as well as increasing communication demands, high-capacity wireless communication is expected to be achieved by exploiting the abundant bandwidth available in the sub-terahertz band from 100 GHz to 300 GHz. However, compared to 28 GHz and other millimeter bands used in current 5G systems, the much higher frequencies of the sub-terahertz band will require entirely different wireless devices that are now being developed from scratch. To be successful, this effort will need to overcome several key challenges, such as determining the specific performance requirements of wireless devices operating in the sub-terahertz band, and then actually developing such devices.
Going forward, the four companies will continue to conduct extensive R&D into sub-terahertz telecommunications, leveraging each company's strengths in various initiatives to contribute to 6G standardization.
(1) This assumes that as of March 2024, no other entity has announced 1) achievement of 100 Gbps transmission over a distance of 100 meters in the 100 GHz band (according to NEC); 2) achievement of 100 Gbps transmission over a distance of 100 meters in the 300 GHz band (according to NTT); and 3) achievement of an equivalent isotropic radiation power (EIRP) of 50 dBm and a beam steering angle of approximately ±30 degrees using 100 or more APAA elements in the 100 GHz band (according to NEC).
(2) The transmitter and receiver are facing each other in a straight line with no obstacle between them.
(3) Maximum values specified in technical standards, but not representing the actual data rate, provided on a best-effort basis. Actual data rates may vary depending on the communication environment and network congestion.
(4) World's highest efficiency under specific high-power conditions in the 100 GHz and 300 GHz bands, respectively, according to Fujitsu as of March 2024.
Suggested Items
Q1 Global Semiconductor Sales Increase 15.2% YoY
05/07/2024 | SIAThe Semiconductor Industry Association (SIA) announced worldwide sales of semiconductors totaled $137.7 billion during the first quarter of 2024, an increase of 15.2% compared to the first quarter of 2023 but 5.7% less than the fourth quarter of 2023.
Micross, Sital Announce Global Manufacturing & Distribution Partnership
05/07/2024 | Micross Components, Inc.Micross Components, Inc., a leading global provider of mission-critical microelectronic components and services for high-reliability aerospace, defense, space and industrial applications, is pleased to announce our exclusive partnership with Sital Technology (sitaltech.com), the leader in MIL-STD-1553 IP cores, specializing in integrated FPGA solutions.
Flex Announces Upcoming Changes to Its Board of Directors
05/07/2024 | FlexFlex announced that consistent with its succession plan, Michael D. Capellas, non-executive Chair of the Board of Directors of Flex, has informed the Board of his decision not to stand for re-election to the Board at the company's 2024 Annual General Meeting of shareholders to be held on August 8, 2024. Mr. Capellas has served on the company's board for 10 years, including as Chair since 2017, during which time he played a key role in building Flex's reputation as a trusted global technology, supply chain and manufacturing solutions partner and driving the company's success.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
Fabrinet Announces Q3 Fiscal Year 2024 Financial Results
05/07/2024 | FabrinetFabrinet, a leading provider of advanced optical packaging and precision optical, electro-mechanical and electronic manufacturing services to original equipment manufacturers of complex products, today announced its financial results for its third fiscal quarter ended March 29, 2024.